Elita Bespoke

Elita Labs Ltd

Elita's Bespoke Range

Elita bespoke is our custom colour match service, where you send us your tile sample and we’ll match our resin to it perfectly.

We know that colour matching is a time consuming process so we take the stress out of this for you.

Simply Purchase a tin of bespoke, then send us a sample of your tile along with your order reference and we’ll do the rest.

There will be roughly a 2 to 3 week lead Time from receipt of the tile sample, production time depends on the volume of request we have received at that particular time.

You will receive a 1L tin (more can be supplied on request) of the requested colour as well as any additional colours required for veins or streaks the tile may have.

***If purchasing our bespoke service please label your tile sample with your name, address, tile colour and a brand before sending to us. ***

FULL PRODUCT FACT SHEETS:
Elita Hardener Click Here
Elita Mitre Glue Click Here

Description

• Simply Purchase a tin of bespoke, then send us a sample of your tile along with your order reference and we’ll do the rest.
• High bonding strength
• High wear/weathering resistance
• Rapid cure
• 1L
• Supplied with hardener.

Instructions for use

Ensure the tile joint/mitre is thoroughly clean, free from dirt and moisture. Remove the desired amount of the mitre glue from the container and thoroughly mix with 3% hardener in a separate container. Apply to the joint within the 2-3 minute working time. Cure time = 5-10 minutes. For a faster cure or in colder weathers apply more hardener. For a slower cure or in hotter weathers use less hardener. To colour match the mitre glue to the tile, simply add Elita colour pigments until you’ve reached the desired finish. Ensure you use an appropriate base colour resin that closely matches the colour of the tile before adding the colour pigments. Note: too much pigments can impact the properties of the mitre glue and prevent it from curing.

Always refer to the safety instructions on the container.